English
Français
Deutsch
Italiano
Русский
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
-
The paper making felt wet suction box made by stainless steel and ceramic 1. face board: Long strip board with rake angle, horizontal support surface and backward inclination angle. The bottom is made into various tongue and groove shapes to match the connection bracket. The face board requires a ...
-
High molecular polyethylene(HDPE)faceboard made for the vacuum suction box / forming board After the slurry is formed on the net and preliminary dewatering, its dryness and tightness gradually increase, and the resistance to dehydration increases. To continue dewatering on the net, a method of high ...
-
Wire &felt rectifier also called rectifier, felt deviation controller, pneumatic automatic deviation corrector; Wire &felt deviation corrector; paper machine net blanket corrector; paper machine deviation corrector. Technical Parameters: Stand size 600mm x 500mm Material: The valve body is made of ...
-
The stainless steel body ceramic faceboard foil box used for the dewatering The foil box consists of face board and frame, and is divided into single-page, double-page and multi-page foil boxes. 1. face board: Long strip board with rake angle, horizontal support surface and backward inclination ...
-
1. Waste paper tailing pulp rejects seperator in the carton paper making The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is ...
-
3. Replaceable dump rejector rotor blades with high wear resistance stainless steel The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal ...
-
4. Rejects seperator screen plate made by stainless steel material The rejects separator is an ideal equipment for tailings treatment in waste paper pulping system. Adopting closed operation, no splash of pulp water, good treatment effect, reducing fiber loss, and low slag disposal cost. It is a ...
-
Vertical wood pulp board breaking and pulping machine for the printing paper / tissue paper This equipment is a vertical structure, which is mainly composed of a trough, a rotor, a transmission part, a pulp tray, a bracket and other parts. The rotor device is composed of a rotor and a bearing ...
You Might Be Interested In
